Land Rover Range Rover Evoque 2011 to 2018 5 Seater Boot Liner

If you would like to protect the second-row of seats headrests and the top of the rear seats, then you will need the Rear Seat Flap. This Extra has two functions;

1. To protect the top of your rear seat from drooling dogs for example
2. To extend the coverage of the Boot Liner when the rear seats are folded (only when you have already ordered a Rear Plus or Rear Split) See photo 4 & 5.

The rear seat flap is a bound, rectangular piece of PVC which attaches to the Boot Liner by hook fastener and is designed to sit over the headrests. However, if you have tall headrests then your rear view may be restricted. If your headrests are removable you can modify the rear seat flap to allow it to fit underneath the headrests.

If you order a Rear Seat Flap with your Boot Liner we will manufacture a loop fastener seam across the top edge of the Boot Liner on the back seats (see photo 1).

* Due to additional fixings required to the boot liner, the Rear Seat Flap MUST be ordered together with a boot liner and cannot be added at a later date.

* Please note photographs are generic

If you wish to protect the entry plate of your boot along with the bumper from scratches and scrapes when you are loading/unloading your vehicle or when dogs are getting in/out, then you may wish to add the Bumper Flap.

The Bumper Flap is a bound, rectangular piece of PVC which attaches to the Boot Liner by hook fastener.

You can attach the Bumper Flap to the Boot Liner as and when required, or you can fold it into the vehicle, or, detach it and store it elsewhere.

If you order a Bumper Flap with your Boot Liner we will manufacture a loop fastener seam across your Boot Liner just inside the entry to the rear of the vehicle (see photo 2).

* Due to additional fixings required to the boot liner, the Bumper Flap MUST be ordered together with a boot liner and cannot be added at a later date.

* Please note photographs are generic

The Tailgate Cover (also known as Rear Door Cover) is attached using hook and loop fastener.

It protects the inside of your car boot door.

Please note, the Tailgate Cover will cover the handles and interior lights. You can create cut-outs in the boot liner to expose these by cutting the PVC with scissors. Please note, the Material does not tear or fray. Please read the cutting guide here.

* Please note photographs are generic.