How to clean your car boot, a step-by-step guide!
- 8 Jan 2016
- Please take two lint free cloths – one will be used for cleaning and another one will be used for drying
- Apply Autoglym Intensive Tar Remover generously to the first cloth.
- Using first cloth with Autoglym Intensive Tar Remover scrub the surface clean where you are going to apply the Velcro onto the plastic
- Then thoroughly dry the area with the second cloth (with no Autoglym Intensive Tar Remover applied to it)
- When drying the area, you need to get it to the point where the cloth is dragging and slightly peeling off onto the plastic. Then dust away the strands of cloth. You may need to repeat steps 3 + 4
- Stick the Velcro onto the plastic
- Wait 24 hours/designated time stated on fitting instructions until fitting the liner
